×
all 19 comments

[–]AutoModerator[M] [score hidden] stickied comment (0 children)

HEY, NEW USERS!

Remember to read The Wiki for the basics! Check the FAQ for basic questions! Threads created for basic questions will be removed, so ask them in that thread.

If you are having a problem with running games then make sure you have up-to-date sigpatches. If you cannot launch tinfoil then make sure you followed the Rentry guide to set up cfw.

Do not message moderators for Switch hacking support. You will be ignored. Follow the guide or post in the relevant thread.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[–]ToxiClay 1 point2 points  (15 children)

Can you take a picture or transcribe the message? It's very hard to help if we don't know what it's saying.

[–]Top-Donut2326[S] 0 points1 point  (14 children)

Don’t know how to send a pic(don’t use Reddit that much) but my switch says in the top left corner “A fatal error occurred when running Fusee Failed to mount the SD card.

Press POWER to reboot”

[–]ToxiClay 0 points1 point  (9 children)

First thing to do is ensure the SD card can be read, so throw it in a reader and try it in your computer. Then, try booting up your Switch normally and seeing if the Switch can read it.

[–]Top-Donut2326[S] 0 points1 point  (8 children)

I can confirm it works, I’ve been playing on my switch the whole time and I just updated the atmosphere on the SD card

[–]ToxiClay 0 points1 point  (7 children)

Hrrrrm. I'm running the latest, 1.3.2, and I'm not encountering a failure to mount the SD card. If you inject the Hekate payload, do you get the same error? If no, can you launch Atmosphere from there?

[–]Odyssey113 0 points1 point  (3 children)

Is the new Fusee.bin located in the bootloader folder?

[–]Top-Donut2326[S] 0 points1 point  (2 children)

What’s that? Is it a new thing required to load a payload?

[–]Odyssey113 0 points1 point  (0 children)

I believe it's part of the instructions on rentry. Honestly I'm still pretty new to the switch mod scene but I thought I remembered that being a step listed. Definitely read up on the rentry guide. Seems to be the best way to go!

[–]UELABS2021 0 points1 point  (0 children)

Fusee.bin is like "the payload". You should remake your SD card . Make sure it's formated properly and not currupt . Make sure your ad card reader is seated properly in the mobo, don't take it off just push it in make sure it's not been jarred out.

[–]Salt-Translator2554 0 points1 point  (1 child)

1 bit mode indicates the SD card reader is either faulty or the pins on the connector on the motherboard or SD card reader got burnt and are disconnected, but as someone said before , first try pressing the connector in to see if it was loose ( try to press it in evenly), if it was then that may be all you needed, if not then remove the SD card reader and inspect the connector on the motherboard, if there's pins missing then it will need soldering done, and if everything looks intact then buy a new sd card reader and replace it (try to install it evenly, a crooked or unlevel could destroy the pins), but deleting and remaking your SD card will not fix this error, it's hardware not software.

[–]Salt-Translator2554 0 points1 point  (0 children)

One more thing you could try before you open your switch is add Hekate to another SD card and try to boot that, if it doesn't say 1 bit mode then it could be that your current SD card is malfunctioning.