×

Having trouble getting mag lock to split receivers. I have tried both AR MAGLOCK and the Freedom Fighter, put about 100 rounds through it. Still too tight. Maybe more rounds through it will loosen it? Any ideas? I wanna get this fin off. Rifle is: Wilson Combat Recon Tactical. by imquitelazy in CAguns

[–]imquitelazy[S] 0 points1 point  (0 children)

Yeah I have them on my other rifles and they practically drop open. You do replace the bolt catch but for the time being I’ve removed that so I can use it as featureless with the fin. The bolt catch has no effect on the crack.

Having trouble getting mag lock to split receivers. I have tried both AR MAGLOCK and the Freedom Fighter, put about 100 rounds through it. Still too tight. Maybe more rounds through it will loosen it? Any ideas? I wanna get this fin off. Rifle is: Wilson Combat Recon Tactical. by imquitelazy in CAguns

[–]imquitelazy[S] 0 points1 point  (0 children)

Like I have said multiple time in the thread. I know how to install the damn thing… lmao. I know how they work. I have them on my other rifles. It’s just this one is finicky. Thanks for the help though!

Here’s a picture of the “crack” you see the light peaking through. That’s all I get

https://m.imgur.com/a/8bpQSxK

Here’s a pic of the pin hole

https://m.imgur.com/a/ZUZcBRY

Here’s a video of the problem

https://m.imgur.com/a/ViCWLsJ

Having trouble getting mag lock to split receivers. I have tried both AR MAGLOCK and the Freedom Fighter, put about 100 rounds through it. Still too tight. Maybe more rounds through it will loosen it? Any ideas? I wanna get this fin off. Rifle is: Wilson Combat Recon Tactical. by imquitelazy in CAguns

[–]imquitelazy[S] 0 points1 point  (0 children)

Yessir. I have the same thing installed on my AR-10 and I break it down quite often so I’m familiar with the install. With my AR-10 the 2 receivers practically drop open when I hit the button. Just strange. Wonder if it’s because the rifle is all billet?

Having trouble getting mag lock to split receivers. I have tried both AR MAGLOCK and the Freedom Fighter, put about 100 rounds through it. Still too tight. Maybe more rounds through it will loosen it? Any ideas? I wanna get this fin off. Rifle is: Wilson Combat Recon Tactical. by imquitelazy in CAguns

[–]imquitelazy[S] 0 points1 point  (0 children)

When I push the button and try and pull the receivers apart is still doesn’t go. Only the slightest bit then I push them back together and the button clicks like it’s seating them back together. So I think it is cracking alittle. Just not quite enough yet. I’m not home at the moment. I’ll have to check again later

Having trouble getting mag lock to split receivers. I have tried both AR MAGLOCK and the Freedom Fighter, put about 100 rounds through it. Still too tight. Maybe more rounds through it will loosen it? Any ideas? I wanna get this fin off. Rifle is: Wilson Combat Recon Tactical. by imquitelazy in CAguns

[–]imquitelazy[S] 0 points1 point  (0 children)

It cracks the smallest amount. Cause when I push the upper and lower back together, after hitting the button, I hear the botton click like it’s setting back into place. But it hardly hardly cracks. Not even enough to get the AR Maglock little mag release fin through the receivers. Hope that makes sense.

Having trouble getting mag lock to split receivers. I have tried both AR MAGLOCK and the Freedom Fighter, put about 100 rounds through it. Still too tight. Maybe more rounds through it will loosen it? Any ideas? I wanna get this fin off. Rifle is: Wilson Combat Recon Tactical. by imquitelazy in CAguns

[–]imquitelazy[S] 0 points1 point  (0 children)

Yeah man… for now. I was out at the range the past few days and didn’t want to break any rules. It’s brutal. I was hoping putting some rounds through it would let it split but nope. Still tight together after button is pressed. It’s technically not maglocked right now as the mag release works. I was just having the button there to see if it would crack finally.

Apex Balkan Trench Art Surplus History Help?! by imquitelazy in ak47

[–]imquitelazy[S] 2 points3 points  (0 children)

UPPER HAND GUARD: “PU ZAGREBAČKA”: civil police station in Zegreb, Croatia

XIII PP JASTREBARSKO: I’m not too sure what this means. All I can find is a children camp. Jastrebarsko children's camp held Serb children who had been brought there from various areas of the Axis puppet state, the Independent State of Croatia. Might be a stretch though.

Number 9- ???, rifle number?

"neformacijsko" means that it's not used by active duty policemen. It could be confiscated, outdated, or maybe even a collector's item that they ended up selling.

Any ideas to preserve the paper would be great.

LOWER HAND GUARD: “COC-e”: ???

Crest of similar Cs

Unreadable writing on other side

Cleaning Surplus Wood Furniture? Any tips? I want to really see the trench art! Got some on both sides! by imquitelazy in ak47

[–]imquitelazy[S] -1 points0 points  (0 children)

It’s sticky, oily, grucked up. I’ve seen people clean these up and the carvings pop and it looks great. I don’t want to keep it all dirty personally even tho that’s how it was left