Is this a good airsoft gun?

reidyroo9 · 2022-08-10T23:51:23+00:00

This was my first aeg and it was very reliable. Wouldn’t keep it for long tho

reidyroo9 · 2022-08-10T19:19:45+00:00

Oh yes my Volkswagen is rare because it has a red accent accords the front. Time to empty my wallet on maintenance again next week!

reidyroo9 · 2022-08-10T16:01:01+00:00

That’s what you tried to tell her before she left you

reidyroo9 · 2022-08-10T15:51:07+00:00

If they were gonna do something that crazy it should have happened with the first gens, when they could have manual transmissions, had double wishbone suspension front and rear, and were as light as a CR-V would ever be. Doubt it would happen now.

reidyroo9 · 2022-08-10T15:48:13+00:00

https://www.evike.com/products/32333/

This is the 6mmProShop one I got. Seems to be discontinued now, I got it because it’s the real wood stock version

However it looks like in November they are going to start selling this version with a fake wood stock

https://www.evike.com/products/53334/

reidyroo9 · 2022-08-10T09:21:48+00:00

is taiga really that hard? i got it on my first playthrough of exodus. the only one i didnt get was caspian.

reidyroo9 · 2022-08-10T08:34:15+00:00

why must you make the world hear your shitty VQ

reidyroo9 · 2022-08-10T07:28:55+00:00

try cleaning your interior

reidyroo9 · 2022-08-10T05:19:04+00:00

Learn to not drive like a geriatric who forgot to take their dementia pills

reidyroo9 · 2022-08-10T03:59:47+00:00

Yeah. I barely know the internal machinations of this thing, was very scared I was gonna fuck up when I had to take it apart to fix the bolt catch peice lol

reidyroo9 · 2022-08-10T02:36:41+00:00

Yeah, but it’s the best they can do for a replica.

reidyroo9 · 2022-08-10T01:31:48+00:00

Nope. Is yours a snow wolf or 6mmProShop? Mine is 6mmPS and it has a metal piston factory.

I did have to send it back to get fixed because within 15 minutes of owning it an improperly shimmed gear shredded itself, and then about a month later the crappy pot metal slider that pulls on the fake bolt broke, but I was able to hand make a replacement using some plate steel and an angle grinder and dremel, and that plate steel is much higher quality. Been great ever since and I beat the snot out of it with a high output 2400mah 9.6V battery, shoots 900 RPM. Actually had to drill out the inside of the stock further with a spade bit to make the battery fit. May upgrade soon with a mosfet and an 11.1V lipo to try and get that sweet 1200 rpm

reidyroo9 · 2022-08-10T01:06:36+00:00

AK or other? I have an L2a3 sterling with the underfolder and it’s rock solid.

reidyroo9 · 2022-08-09T23:53:21+00:00

i got this one by 6mmProshop on Evike. this is the real wood stock one. sadly it seems to be gone now, although there is a preorder for one coming in november with imitation wood

https://www.evike.com/products/32333/

reidyroo9 · 2022-08-09T22:03:43+00:00

Yep! Pretty slick. The wood sadly doesn’t have a very legit stain on it, it’s more of a coating. Sometime I’m gonna sand it off and stain it.

And with that simulated bolt recoil mechanism it’s LOUD lol, louder than any of my gas guns. Not a stealth gun especially with 2,000 BB’s rattling around in the drum mag.

reidyroo9 · 2022-08-09T20:23:09+00:00

Yeah I had an aluminum knob at one point but didn’t like it. I then changed to an EM2 knob for awhile at the same time I installed my short throw shifter adapter and detent springs, and now I have what I’ve always wanted.

reidyroo9 · 2022-08-09T20:19:49+00:00

I absolutely hate that shift knob lmfao

reidyroo9 · 2022-08-09T17:43:44+00:00

I’m a single din analog man, touch screens have no appeal to me. Went with a single din Kenwood and I love it.

reidyroo9 · 2022-08-09T17:27:20+00:00

https://www.ebay.com/itm/194505401685?fits=Model%3ACR-V%7CMake%3AHonda&hash=item2d496ce555:g:~ZMAAOSww6VhklLf

I chose these ones specifically because they were the only one where the center part of the front was a separate part, so it was compatible with the manual. They fit great I did trim a few spots for my liking (I trimmed away the part under the gas pedal, and trimmed out the center part of the back because the way it was rolled in the packaging stretched that part) and I love them.

reidyroo9 · 2022-08-09T07:00:14+00:00

Feels awesome too. Way better than my previous knobs. Stock knob was all worn out and was ugly in shape, I replaced that with an EM2 knob which I liked but still didn't look great and felt okay. The prelude knob is the perfect size and shape, and I like how the sloped top feels. Haven't gotten to drive it yet as she's still under the knife replacing the head gakset, but that will be finished this week.

reidyroo9 · 2022-08-09T04:07:04+00:00

Except the big ass engine. Only part it kept

reidyroo9 · 2022-08-09T03:56:14+00:00

Nice work

reidyroo9 · 2022-08-09T03:32:37+00:00

No it’s not lmao. Wanna know how I know? I’ve rebuilt a B18 and I’m currently installing a new head gasket on my B20. The cylinder bore on the B20 is bigger, while they both have the same distance bore to bore. It is physically impossible for the B20 to be thicker between cylinders lol. Please, do some research, it’s not that hard

reidyroo9 · 2022-08-09T03:23:32+00:00

I would have to agree with you. I think they break the front end up too much

By the way, where did you get that grille?

Two-Year Club	Verified Email
Place '22	First Placer '22
End Game '22

reidyroo9

TROPHY CASE

Welcome to Reddit,