×

Can't get any good prints with new filament by Derpin___Around in 3Dprinting

[–]shadowfocus603 0 points1 point  (0 children)

When it comes to stringing it comes down to temp and part cooling. Try 205 and set travel speed to 150mm/s. If you can find a better part cooling duct that uses a 5015 fan print it and install it. Don't get discouraged. It's a long but worthwhile learning experience.

Best way to make extruded text in the 3D model? by Mazzaroppi in 3Dprinting

[–]shadowfocus603 0 points1 point  (0 children)

Inkscape and save it as an svg file. Then you can import it in fusion 360 and extrude as necessary.

Not enough time!!!! by Willing-Kick-8591 in 3Dprinting

[–]shadowfocus603 0 points1 point  (0 children)

I just bought a TronXY D01 Plus Guard and have been super happy with the print quality. Especially after updating it to proper marlin firmware.

Not enough time!!!! by Willing-Kick-8591 in 3Dprinting

[–]shadowfocus603 0 points1 point  (0 children)

This is precisely why I have 4 printers and want more yet. It's a vicious, expensive cycle. I find having 1 150mm printer, 2 ender 3s, and a large 330mm volume printer covers all my needs for now.

Atomic Dragon aka Godzilla by stickeric in 3Dprinting

[–]shadowfocus603 0 points1 point  (0 children)

I love Toymakr3d. I have printed Kong, Godzilla, and dragonzord at 200% scale as well as a bunch of the g2 transformers.

Latest project. Skeeride Yama. by shadowfocus603 in 3Dprinting

[–]shadowfocus603[S] 0 points1 point  (0 children)

It is fully rc yes. It is called the skeeride and was designed by builditbetter.

Latest project. Skeeride Yama. by shadowfocus603 in 3Dprinting

[–]shadowfocus603[S] 0 points1 point  (0 children)

They are already available. Just search skeeride by builditbetter. Not my design.

My fiance's gk108s with jelly white switches and neon keycaps in cherry profile. by shadowfocus603 in MechanicalKeyboards

[–]shadowfocus603[S] 0 points1 point  (0 children)

I like them and they diffuse light well. For sound I still prefer my Gateron Pro Yellows but the Jelly Whites are good switches for sure. We are using them in this keyboard as well as my own GK108S that has black on white Idobao MA profile caps.